LED Lightbars by NovexComm

Our 18 inch "cool white (6500° Kelvin)" LED Light Bar (also available in red and blue) is powered by 12 Volts DC and is mounted on a 1U panel (perforated / vented is shown but can be solid aluminum if desired).   A dimmer allows gives variable brilliance light for night time deployments with rack mounted cases allows the case lid to be fully closed.
Dimensions are only ½" square on the LED bar and it is shown as mounted on ¾" standoff brackets for the 110 degree light to shine out easily.
The rotary dimmer smoothly varies the light output from barely lit to almost overpowering; set and it is quite stable.
Current draw is quite low at full brilliance of 143 lumens at only 340 milliamps so it won't drain your battery.

Use it to illuminate in the radio room or mounted in a console to cut down on the glare at night but still see the knobs and buttons clearly.
A large number of radios have backlit meters and digital displays but not the controls or knobs; so this light bar helps a lot!
OPTIONS:
Perforated/ ventilated 1U panel painted black, with LED and dimmer

  • Select Red, White, or Blue color
  • You can add 2 speakers inside for an extra cost with ⅛ 3.5 mm phone plug on the end of the wires
  • Or, you can add 4 fans for ventilation for an extra cost (can be pull air IN or OUT or combination of two IN and two OUT for improved cooling)



Contact Us Today!

NovexComm Newsletter

FIFTY WAYS USING HAM RADIO TO BEAT THE VIRUS

With apologies to Simon and Garfunkel, 50 Ways Song parody by Bob Burchett

Social-distancing via ham radio is the best medicine; just remember this little ditty:
The problem is all inside my head; yes, I know;
My wife this morning said to me
The answer's easy if you stop wondering Joe
I'd like to help you fellow hams....but then you know:
There must be fifty ways to beat the virus....Fifty ways to beat this virus....

Stay back in the shack, Jack
Don't need to be coy, Roy, just listen to me
Hop off the bus, Gus, there's fungus among USSS!
Don't hoard the TP Lee, to keep virus free.

You are already used to DX all alone
And you may have L-O-T-L everyone
So when you burn the midnight oil in there
DXCC is still elusive; work some more.

Don't visit your gran; Stan
Wipe down every toy Roy, just listen to me
Just use that Purell; Mel
Keep pounding the key Lee; heed the CDC. Keep virus free.

This Cycle 25 is not going so well
And FT8 may be the way
I'm trying PSK and other crazy codes
The Gray Line moves much faster than I can today

So work 40 meters Peter
Rag chew on FM; Tim
This isn't spring break Jake
Call CQ all day

Wear a mask on the bus Gus...don't need to discuss muuuuuch
Stop touching your face Grace
You need PPE...
Hide out in the shack, Mack. Stay home if you're sick, Dick
Have wipes in your purse, nurse and stay virus free.

Sneeze into your sleeve, Steve
Keep back 2 Meters, Jeeter
Just follow the rules, Jules to keep virus free.
Keep soap in your hand Fran and keep virus free!

WB6SLC W6JK WA6ILQ KD8PIQ K6SLC

Random Rack

Kenwood 751A With Speaker

$154.95

Kenwood 751A With Speaker

Size: 2U

|
Shop for more products in our store by clicking here.

Rack Mount Your Radios

NovexComm provides low-cost, professional rack mounts for many popular radios, giving operators a source for off-the-shelf, low cost radio rack mount kits.

Why Rack Mount Radios?

Here are just a few reasons given by some of the operators we have heard from
  • Gives my radio room a professional look.
  • Saves space so I can buy more radios and have a place to keep them.
  • Makes it easier to access and use my equipment all in one place.
  • Keeps my gear protected from bumps and scratches.
  • If someone breaks into my house, then they will have a difficult time getting my radios.
  • I finally have all those ugly wires out of sight, looks great.
  • My wife likes the way my shack looks; she even shows her friends my room.

Testimonial

WA5RAY Testimonial:
Thanks Novexcomm for your great products. I was trying to rack mount my radio equipment into my console racks and was failing miserably. Luckily, I ran across your ad and have since successfully rack mounted several units very easily. The chassis design of your system for the larger rigs moves the weight of the actual radio equipment from the front panel and transfers it to the rack through your integrated chassis shelf. This greatly helps installing, removing and working on the gear. It also reduces the rattles that come from the stresses from the weight of the gear that is supported entirely from the single panel itself. Very COOL indeed! Thanks again for being there for a guy in need.
Ray, WA5RAY

Copyright © NovexComm.com